Taking off decals

[adismo]

I took my decals off of my side fairings but that nasty sticky stuff stayed on the fairing and I cant seem to get if off easily.

Any suggestions??:confused:

[Gmoney]

3m adhesive remover... works great - any decent place that sells auto body stuff should have it - so no autopart place chains (actually O'Reilly can order it and have it next day)

[adismo]

ok thank you I will give that a shot

[TroyBoy30]

always use a hair dryer to remove decals

goo gone works well for the adhesive

[TLR67]

If it has clear coat Mineral Spirits works too... Just a little.....

[signguy]

wd-40 then clean with rubbing alcohol

[cjbez07]

this may sound funny.. but i used a pencil erasor.. like one of the big soft kind..that was after i used a hair dryer and goo gone.. and it all worked but not as good as an erasor.

Jaco

[adismo]

i didnt know to use a hair dryer so i just peeled them off..o well... but i tried goo gone and it didnt work so i guess is 3m adhseive remover or an eraser or wd-40 with rubbing alcohol....thanks guys ill let u know what works out for me

[TLR67]

this may sound funny.. but i used a pencil erasor.. like one of the big soft kind..that was after i used a hair dryer and goo gone.. and it all worked but not as good as an erasor.

Jaco

Not silly at all.. I actually have a eraser that attaches to a drill and it removes stickers and gooey stuff with ease.. Great for those warning decals..

[Gmoney]

thats basically what the 3m thing is but holds up a little better..

[THE MUFFIN MAN]

GOOF OFF, sold in hardware at walmart. works in seconds. be sure to wax afterwards.

[willr1]

Brake fluid will remove it quick!!!

Dont do it, that was a joke!