Fender Eliminator Help

[auniquesoul]

I called myself saving some money by purchasing a FE from ebay http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&_trksid=p4340.m748&item=330553099181&viewitem=&_trkparms=clkid%3D8450107165162199801

The FE arrived with no insturctions on how to install, the kit came with 4 turn signals and a tag light too. can anyone tell me how to wire this for a 09 FZ6R?

[RogueElement]

Oversimplified, black to black, color to color.

[auniquesoul]

what about the plate light though?

[RogueElement]

Should be the same 2 wires for that too. Just pull your undertail and most of it should be self explanatory when you're looking at the wiring.

[RogueElement]

Oh and make sure that once you've hooked them up and get ready to test that your + and - leads aren't touching anywhere or you run the risk of blowing a fuse. I've made that mistake more than I'm willing to admit. :up:

[Jerk]

Or.... now is the perfect time to learn how to use a voltmeter! Very simple, and will never lie to you if used properly

The plate light should have 2 wires. 1 black(ground) and 1 red(12v). Connect the black to a ground source, and the red should go to your existing plate light source, which is a constant hot wire.